#Bldc tool terminal battery voltage how to#
#Bldc tool terminal battery voltage professional#

Ensure charging area is well ventilated and there are no sources of ignition (sparks, flames) in the vicinity.

Charging batteries can generate Hydrogen gas.

Check the battery case for damage and remove any corrosion.

Check the electrolyte levels and top up with distilled water if necessary.

These chargers can be used to charge several different battery types due to their multiple stages of charging and ability to determine the batteryвЂ™s state of charge. For deeply-discharged batteriesВ (too flat to start your car) an automatic or smart charger is recommended to thoroughly recharge the battery. Your vehicle alternator is a basic battery charger, which will recharge and maintain your battery while the vehicle is running, provided the battery is not too deeply discharged. There are numerous types of Lead Acid batteries and itвЂ™s important to use the correct charging method to avoid undercharging or overcharging which can damage the battery. The best method to charge your vehicleвЂ™s battery will depend on the type of battery you have. Think safety first always wear protective eyewear and gloves when charging batteries.

#Bldc tool terminal battery voltage professional#

We can inspect, test and report on your batteryвЂ™s condition free of charge and provide you with professional advice on how you can get the most from your batteries. If your battery is still not operating correctly, please contact your nearest R&J Batteries store. Make sure your battery cables are adequately sized to ensure sufficient current flow to and from the battery (aftermarket & auxiliary systems).Ensure charge does not fall below 12.3 volts during storage period. AlwaysВ ensureВ batteries are fully charged before placing in storage.Ensure your battery is fully recharged as partial charge will not prevent sulphation. Discharged or flat batteries should be recharged as soon as possible to prevent sulphation damage.

Replenish with distilled water and donвЂ™t overfill as acid needs room for expansion during charging.

If the battery has removable caps, check the water level at least every 6 months.

Check battery for any physical damage or swelling that could be the cause of overheating or overcharging.

Remove any dirt or grime from the battery.

Check that cable connections are clean, tight and free of corrosion.

A reading of 12.6 to 12.9 volts indicates battery is charged. A simple voltmeter or multi-meter can also be used to check your batteryвЂ™s resting voltage. вЂњGreenвЂќ indicates a healthy battery, вЂњBlackвЂќ or вЂњClearвЂќ indicates your battery may need charging or servicing.

Check your batteryвЂ™s state of charge using the вЂEyeвЂ™ or вЂState of ChargeвЂ™ indicator on the top of the battery.

A few simple checks every three months or so can also help increase your batteryвЂ™s life-span.ДЄlways think safety first wear protective eye-wear and gloves when working near batteries. Taking good care of your battery will ensure the best performance and delivery of power to your car, motorcycle, truck or other application.

#Bldc tool terminal battery voltage how to#

Follow the links below on how to care for your battery and for information that will help you choose the best battery for your vehicle. Regular maintenance on your vehicleвЂ™s battery can increase its life span considerably.